Development and production of thermoelectric modules
               
 
home email
 



According to RoHS directive requirements, serial thermoelectric coolers do not contain lead or any other forbidden materials

According to RoHS directive requirements, serial thermoelectric coolers do not contain lead or any other forbidden materials


Catalog of microcoolers

 

A universal abbreviation is used to notate single-stage coolers: -N-C-h, where:

- product contraction- thermoelectric battery (cooler);

N - number of thermocouples in the cooler;

- length of the rib of the thermoelectric element basis (in millimeters);

h - height of the thermoelectric element (in millimeters)

 

For example, in the module -109-0.6-0.8: 109 thermocouples (218 thermoelectric elements), every element has the cross-section of 0.6×0.6 mm and is 0.8 mm high.

 

Name  Imax
(A)
Qmax
(W)
Umax
(V)
dTmax
(K)
R
(Ohm)
A
(mm)
B
(mm)
C
(mm)
D
(mm)
H
(mm)
TB-8-0.45-1.3 ($14.64)
0.70.41.0671.203.43.45.03.42.30
0.70.61.4671.805.03.45.05.02.30
0.70.92.2672.805.05.06.65.02.30
0.71.73.9675.006.66.68.36.62.30
0.73.58.06710.009.19.911.59.12.30
TB-7-0.6-1.5 ($14.16)
1.10.60.9690.594.34.34.34.33.25
TB-11-0.6-1.5 ($16.92)
1.10.91.4690.919.04.04.09.03.25
TB-17-0.6-1.5 ($19.20)
1.11.42.1691.506.36.36.36.33.25
TB-31-0.6-1.5 ($25.56)
1.12.63.8692.558.08.08.08.03.25
TB-35-0.6-1.5 ($26.04)
1.13.04.3693.1012.06.06.012.03.25
TB-65-0.6-1.5 ($35.52)
1.15.58.1695.6013.012.012.013.03.25
TB-7-0.6-1.2 ($14.16)
1.40.70.9690.514.34.34.34.32.95
TB-11-0.6-1.2 ($16.92)
1.41.21.4690.759.04.04.09.02.95
TB-17-0.6-1.2 ($19.08)
1.41.82.1691.206.36.36.36.32.95
TB-31-0.6-1.2 ($25.56)
1.43.33.8692.058.08.08.08.02.95
TB-35-0.6-1.2 ($25.80)
1.43.74.3692.4012.06.06.012.02.95
TB-65-0.6-1.2 ($32.52)
1.46.98.1694.6013.012.012.013.02.95
TB-7-0.6-1.0 ($14.04)
1.70.90.9690.394.34.34.34.32.75
TB-11-0.6-1.0 ($16.80)
1.71.41.4690.629.04.04.09.02.75
TB-17-0.6-1.0 ($19.08)
1.72.22.1690.956.36.36.36.32.75
TB-31-0.6-1.0 ($25.32)
1.73.93.8691.708.08.08.08.02.75
TB-35-0.6-1.0 ($28.56)
1.74.44.3692.0812.06.06.012.02.75
TB-65-0.6-1.0 ($31.56)
1.78.38.1694.0013.012.012.013.02.75
TB-7-0.6-0.8 ($14.28)
2.11.10.9680.344.34.34.34.32.55
TB-17-0.6-0.8 ($19.32)
2.12.62.1680.766.36.36.36.32.55
TB-31-0.6-0.8 ($24.96)
2.14.83.8681.408.08.08.08.02.55
TB-35-0.6-0.8 ($29.16)
2.15.44.3681.7012.06.06.012.02.55
TB-65-0.6-0.8 ($31.56)
2.110.18.0683.0013.012.012.013.02.55
2.116.913.4685.3026.012.012.026.02.55
TB-17-1.0-0.7
 6.68.42.1680.248.08.08.08.02.45

 

SHOPPING CART ORDERS:  

 

Orders normally ship out within 48 hours of online order receipt.

 

Orders ship from factory, St.-Petersburg, Russia.

 

Prices are in US dollars for quantity 1-100pcs.

 

All orders under 100 pieces are taken only by online shopping cart. Purchases greater than 100 pieces are eligible for PO/Net30 payment terms.

 

Stock of all part numbers is kept on-hand to fulfill smaller orders less than 10 pieces. Stock status of requirements greater than 10 pieces should be confirmed prior to ordering. Contact sales@kryotherm.com

 

If temporary stock outage exists for ordered part number, options will be offered including refund and alternative part numbers. Minimum order for manufactured lot is 100 pieces.

 

Standard Shipping Method ($25usd) is International Postal Service Parcel Post; shipping time varies from 1-2 weeks (Europe), 3-5 weeks (USA), to 4-6 weeks (New Zealand, Australia). No tracking information is available. In six years, shipping thousands of on-line orders, not one has been lost (worldwide).

 

Expedited Shipping Method (extra $60usd charge, must order as a separate item in shopping cart) is by UPS or DHL international express service. Shipping time varies from 2-6 days to most worldwide locations.

 

ORDER EXPEDITED INTERNATIONAL PRIORITY SHIPPING HERE ($60USD). 

Epoxy or Silicone sealing is offered at no additional charge (may delay shipping by up to one week). In checkout "additional instructions" box indicate desire for sealing.  Other options available on an as available basis, contact sales@kryotherm.com

 

STANDARD TERMS OF DELIVERY:

 

- substrate material - alumina (-96)

- height tolerance + 0,15 mm

- parallelism 0,15 mm

- cable length 50 mm

- pin orientation (for rectangular coolers) - to the longer side

- processing temperature up to 80, maximal assembly temperature 120 (assembly solder Tm = 139)

 

ADDITIONAL OPTIONS

Description

Notation (*)

Note

processing temperature up to 120 C, max assembly temperature = 130 C 

HT(120)

assembly solder with Tm = 139 C 
processing temperature up to 150 C, max assembly temperature = 170 C 

HT(150)

assembly solder Pb-Sn with Tm = 183 C 
processing temperature up to 200 C, max assembly temperature = 220 C 

HT(200)

assembly solder with Tm = 232 C
height tolerance = + 0.05 mm and parallelism 0.03 mm

L1

 
height tolerance = + 0.025 mm and parallelism 0.02 mm

L2

 
metallization of cold (mc) and (or) hot side of cooler with solder tinning (melting temperature = 95 C, 117 C, 139 C, 183 C)

mc95, mh95, mm117 etc.

 
gold plating

mcAu, mhAu, mmAu

metallization Cu-Ni-Au (0.2-1 micron)
substrate material - aluminium nitride (AlN)

N

heat conductivity > 180 W/mK
sealant: epoxy, silicon, urethane, conformal coating

E, S, U,

 
non-standard pin orientation  
type and length of wires by customer's requirement  
soldering on cold or hot heatsink, packaging or cold block  
(*)         the notates shown are used to notate additional options in cooler name

For example, TB-109-0.6-0.8 HT(200) mmAu N denotes thermobattery TB-109-0.6-0.8 made on substrate material of aluminium nitride

with processing temperature up to 200 C, with metallization of both substrate material plates with golden coating.

 


  


 
 
 

© 2007 "Kryotherm". 197348, Russia, Saint-Petersburg, Aerodromnaya st. 6