Development and production of thermoelectric modules
               
 
home email
 



According to RoHS directive requirements, serial thermoelectric coolers do not contain lead or any other forbidden materials

According to RoHS directive requirements, serial thermoelectric coolers do not contain lead or any other forbidden materials


Catalog of generating modules

 


System of notation

A universal abbreviation is used to notate generating modules: GM-N-C-h, where:
GM - product contraction- Generating thermoelectric module;
N - number of thermocouples in the module;
- length of the rib of the thermoelectric element basis (in millimeters);
h - height of the thermoelectric element (in millimeters)

For example, in the module TGM-127-1.0-2.5: 127 thermocouples (254 thermoelectric elements), every element has the cross-section of 1,0×1,0 mm and is 2,5 mm high.

 

Application recommendations:

1. Generating modules (TGM) must be installed on flat surface. This requirement is especially vital for the cold side of TGM. The purity of surface processing on which TGM is installed must be better than  20 microns.

2. The pressing force must be not less than 350 - 450 N

3. Temperature of the hot seam shall not exceed 200 C

 

Attention! During the exploitation of TGM with the decrease of electric load an increase of the hot seam temperature up to 5% off the difference between hot and cold sides of the module can follow.

Type

Buy Now

Price
(1-99)

Geometrical dimensions, mm

Cold end = 50 ºC  Hot end = 150 C

Rinternal

Rheat

U

I

W

Efficiency

A

B

H

Ohm

K/W

V

A

W

%

TGM-127-1,0-0,8

$34.39ea.

30 30 3,1 2,41 1,4 1,83 0,76 1,38 2,3
TGM-127-1,0-1,3
$30.74ea.
 
30 30 3,6 3,92 2,27 2,18 0,56 1,21 2,7
TGM-127-1,0-2,5
$34.39ea. 
 
30 30 4,8 7,53 4,36 2,55 0,34 0,86 3,2
TGM-127-1,4-1,5

$39.82ea. 

 
40 40 3,9 2,46 1,43 2,25 0,91 2,05 2,8
TGM-127-1,4-2,5
 $36.29ea.
 
40 40 4,8 3,84 2,23 2,5 0,65 1,63 3,2
TGM-199-1,4-0,8

$77.62ea.

 
40 40 3,2 1,93 0,45 2,19 1,14 2,49 1,8
TGM-199-1,4-1,2

$61.24ea.

 
40 40 3,6 2,89 0,68 2,69 0,93 2,5 2,2
TGM-199-1,4-1,5

$60.35ea.

 
40 40 3,9 3,85 0,91 3,03 0,79 2,39 2,4
TGM-287-1,0-1,3 

$43.97ea. 

 
40 40 3,6 8,85 1 4,54 0,51 2,33 2,5
TGM-287-1,0-1,5 
 $47.75ea.
 
40 40 3,8 10,2 1,16 4,77 0,47 2,23 2,7
TGM-287-1,0-2,5 
 $64.13ea.
 
40 40 4,8 17 1,93 5,49 0,32 1,77 3,1
   
 
       

 

Cold end=  100 ºC
 
Hot end = 200 ºC

 

TGM-127-1,0-0,8     30 30 3,1 2,51 1,36 1,73 0,69 1,19 2
TGM-127-1,0-1,3     30 30 3,6 4,07 2,21 2,07 0,51 1,05 2,4
TGM-127-1,0-2,5     30 30 4,3 7,84 4,26 2,43 0,31 0,75 2,8
TGM-127-1,4-1,5     40 40 3,9 2,56 1,39 2,13 0,83 1,78 2,4
TGM-127-1,4-2,5 40 40 4,8 4 2,17 2,38 0,6 1,42 2,7
TGM-199-1,4-0,8     40 40 3,2 2 0,44 2,07 1,03 2,14 1,5
TGM-199-1,4-1,2     40 40 3,6 3,01 0,67 2,55 0,85 2,16 1,9
TGM-199-1,4-1,5     40 40 3,9 4,01 0,89 2,88 0,72 2,06 2,1
TGM-287-1,0-1,3     40 40 3,6 9,21 0,98 4,3 0,47 2,01 2,2
TGM-287-1,0-1,5      40 40 3,8 10,6 1,13 4,52 0,43 1,93 2,3
TGM-287-1,0-2,5      40 40 4,8 17,7 1,88 5,22 0,29 1,54 2,6


SHOPPING CART ORDERS:
 

Orders normally ship out within 48 hours of online order receipt.
 

Orders ship from factory, St.-Petersburg, Russia.
 

Prices are in US dollars for quantity 1-100pcs.
 

All orders under 100 pieces are taken only by online shopping cart. Purchases greater than 100 pieces are eligible for PO/Net30 payment terms.

Stock of all part numbers is kept on-hand to fulfill smaller orders less than 10 pieces. Stock status of requirements greater than 10 pieces should be confirmed prior to ordering. Contact sales@kryotherm.com
 

If temporary stock outage exists for ordered part number, options will be offered including refund and alternative part numbers. Minimum order for manufactured lot is 100 pieces.
 

Standard Shipping Method ($25usd) is International Postal Service Parcel Post; shipping time varies from 1-2 weeks (Europe), 3-5 weeks (USA), to 4-6 weeks (New Zealand, Australia). No tracking information is available. In six years, shipping thousands of on-line orders, not one has been lost (worldwide).
 

Expedited Shipping Method (extra $60usd charge, must order as a separate item in shopping cart) is by UPS or DHL international express service. Shipping time varies from 2-6 days to most worldwide locations.
 

   ORDER EXPEDITED INTERNATIONAL PRIORITY SHIPPING HERE ($60USD). 

 

 

Epoxy or Silicone sealing is offered at no additional charge (may delay shipping by up to one week). In checkout "additional instructions" box indicate desire for sealing.  Other options available on an as available basis, contact sales@kryotherm.com

 

 

 

 

 

 



  


 
 
 

© 2007 "Kryotherm". 197348, Russia, Saint-Petersburg, Aerodromnaya st. 6